RM3090E _58 Vehicle Interior _008786 SUPPLEMENTAL RESTRAINT SYSTEMS _0050513 CURTAIN SHIELD AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  CURTAIN SHIELD AIRBAG ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 62180A 1.INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

a.

Check that the ignition switch is off.


b.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.

Clean any remaining adhesive from the bolt holes for the curtain shield airbag assembly in the vehicle body.


d.

Temporarily install the curtain shield airbag assembly LH with 2 new bolts and attach the 2 claws (A).

NOTICE:

Do not twist the curtain shield airbag assembly when installing it.



e.

Install the 2 bolts.

Torque:
9.8 N*m (100 kgf*cm, 87 in.*lbf)


f.

Attach the 2 claws (B).


g.

Install 7 new clips and then push in the 7 pins.

B339314C01
1.979,2.458 2.354,2.396 false 3.99,2.979 4.302,3.021 false 4.583,2.521 4.906,2.448 false 2.563,1.615 2.875,1.771 0.313,0.156 10 *1 4.521,0.51 4.833,0.667 0.313,0.156 10 *2 2.781,0.302 3.094,0.458 0.313,0.156 10 *3 0.135,0.094 0.448,0.25 0.313,0.156 10 *4 4.927,2.354 5.24,2.51 0.313,0.156 10 *5 3.031,1.625 3.344,1.781 0.313,0.156 10 *1 5.583,0.896 5.896,1.052 0.313,0.156 10 *2 3.125,0.313 3.438,0.469 0.313,0.156 10 *3 0.792,0.083 1.104,0.24 0.313,0.156 10 *4 1.656,0.135 1.969,0.292 0.313,0.156 10 *4 4.063,0.26 4.375,0.417 0.313,0.156 10 *4 6.156,1.063 6.469,1.219 0.313,0.156 10 *4 6.927,1.646 7.104,1.813 0.177,0.167 10 *4 3.833,2.896 4.146,3.052 0.313,0.156 10 *4 2.396,2.302 2.708,2.458 0.313,0.156 10 *4 5.333,0.604 5.646,0.76 0.313,0.156 10 *4
*1 Bolt *2 Claw (A)
*3 Claw (B) *4 Clip
*5 Pin - -



h.
B339312C01
2.729,0.542 2.865,0.365 true 2.802,0.229 3.115,0.385 0.313,0.156 10 *1
*1 Connector Lock


Connect the curtain shield airbag connector.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



i.

Push in the connector lock to install the airbag connector.